Size, Weight:

8.5" W x 8.2" D x 1.7" H (21.5 cm x 20.8 cm x 4.4 cm), 3.1 lbs (1.5 kg)

Color:

Black epoxy paint with white legends

Rack Mount:

1/2 rack space wide, 1 rack space high, one or two modulators may be mounted in a single IEC rack space with RPK 005 (single) or RPK 006 (double) Rack Mount Kits

Power Supply:

Wall Transformer, 24 VAC, 50-60 Hz, 15VA

North America: TFP 016, UL/CSA

Europe: TFP 027-01, 2-pin Schuko plug, CE

UK: TFP 027-02, 3-pin UK plug, CE

Modulation:

FM Wideband, +50 kHz deviation, 50 uS pre-emphasis

Carrier Frequency:

Channel A: Selectable, 2.3/2.8/3.3/3.8 MHz,

Channel B: Selectable, 2.3/2.8/3.3/3.8 MHz

Signal-to-Noise Ratio:

More than 60dB

Frequency Response:

30 to 16,000 Hz, +1 dB, -3 dB, electrical response

Total Harmonic Distortion:

Less than 2%, electrical response

Audio Processing:

Compression (slope) adjustable from 1:1 or 2:1

Switchable compression gain: Moderate: 16dB. Max: 33dB

Auto Carrier Shut-Off:

15-minute timer shuts off carrier when no audio is present (can be disabled)

Power Switch:

Two-position push button, ON/OFF

Power Indicator:

Green LED

Audio Level Controls:

CHA and CHB Input Level, rotary knobs

Audio Indicators:

CHA and CHB Audio Level, 10-segment LED’s

Carrier LEDs:

4 green LED carrier “on" indicators per channel (indicates frequency, malfunctions)

Compress Control:

1:1 or 2:1

Input Mix LED:

Indicates inputs A and B audio are mixed and transmitted by CHA and CHB off

Stereo LED:

Indicates stereo mode

Phones Switch:

Selects CH1 or CH2 for phones when not in stereo mode

Phones Output:

1/4" TRS headphone jack. Accepts stereo, mono and any impedance phones.

Infrared Test LED:

IR LED for receiver testing, monitoring and audio signal testing.

Power Input:

3-Pin Molex, 24 VAC, 50-60 Hz, 15 VA

Audio Input Jack:

CHA and CHB combination XLR/TRS jack

Mic Level:

Balanced, Lo-Z, 100 µV min. to 90 mV max., 1 mV nominal, 3kΩ input impedance, supplies switchable simplex power per DIN 45596 for condenser mics

Line Level:

Balanced or unbalanced, 21 mV min. to 10V max., 212 mV nominal, 100 kΩ

Audio Line Output Jacks:

RCA Jack, CHA and CHB, 500 mV, unbalanced, 100 Ω source impedance, load impedance must be greater than1 kΩ

Configuration Switches:

CHA and CHB 8-position DIP switch, selects Mic/Line input, compressor gain, simplex power, discrete or mixed inputs, carrier frequency, channel disable, auto shut-off timer

Baseband Input Jack:

BNC, allows mixing with additional MOD 232 Modulator (4CH operation), 100 mV, 50 Ω input impedance, use with MOD 232 or MOD 112 (111), BNC, RG-58 Cable

Baseband Output Jack:

Two BNC jacks carry baseband signal, 100 mV/channel, 50 Ω source impedance, for use with WIR TX9 or MOD 232 only

Approvals:

CE, FCC, RoHS, WEEE

Operating Requirements:

0-50º C ambient temperature, non-condensing, non-corrosive atmosphere

Warranty:

5 years on modulator*