WIR SYS 7522 PRO

Mid-range Infrared System

Product Highlights

  • Designed to maximize coverage area up to 12,000 sq. ft.
  • Meets ADA accessibility guidelines
  • Sleek, professional styling complements room aesthetics. 
  • Unit senses if only one channel is in use and doubles the output power on that channel for twice the coverage.

Description

This system features the WIR TX75 PRO infrared transmitter, ensuring participants in a conference room, courtroom, classroom or other mid-sized venue  receive direct, clear communication of your message without sacrificing security. Includes WIR RX22-4 receivers–ideal for single-or two-channel applications. The sleek and stylish WIR TX75 PRO is designed to maximize coverage area up to 12,000 square feet in single-channel mode. Two additional slaves (sold separately) can be added for additional coverage of up to 12,000 square feet each (for total coverage of up to 36,000 square feet). Placing additional slaves in the same room increases coverage and enhances freedom of movement. A single CAT-5 cable carries both power and signal to slaves–truly a one-cable connection. Mounting bracket and power supply are included.

 
Available options:

WIR SYS 7522 PRO c  2.3/2.8 MHz
WIR SYS 7522 PRO d  3.3/3.8 MHz
 
and add the following suffix for line cord:
-01: Euro power cord
-02: UK power cord
-04: Australia power cord

 

 

System Includes

(1) WIR TX75 PRO infrared transmitter 
(3) WIR RX22-4 four-channel selectable, infrared receivers 
(3) HED 021 folding headphones 
(2) NKL 001 neckloops
(3) BAT 001-2 AA alkaline batteries 
(1) IDP 008 ADA wall plaque 
(1) BKT 024 Wall / Ceiling mounting bracket 
(1) TFP 046 international power supply with WLC 004 AC line cord (U.S.)

Features

  • Green power–if no audio is present after a few minutes, unit automatically disables power to IR diodes, reducing power consumption by 80 percent.
  • Headset and stethoset receivers also available for use with WIR SYS 7522 PRO (sold separately). 
  • Robust digital communication bus between master and slave unit reduces interference. 
  • Master unit has troubleshooting lights built in to simplify installation. 
  • Separate Phoenix Contact Connector audio inputs for each channel accept balanced or unbalanced line level inputs; use together for stereo operation or separately for mono. 
  • Unit senses if only one channel is in use and doubles the output power on that channel for twice the coverage.
  • TX75-S slave emitter available for use with WIR SYS 7522 (sold separately).
  • Front cover can be painted to match decor.

Specifications

BAT 001-2

Alkaline, 1.2 Volt

HED 021

Style

Mono, folding headphone

Plug

3.5mm mono

Cord

39"

Driver Size

30 mm

Nominal Impedance

32Ω

Freq. Response

20 - 20kHz

Weight

52g

Max Power Input

100 mW

Sensitivity

110 dB @ 1kHz

Replacement Pads

HED 023 (one pair)

IDP 008

10-3/8" (L) x 6-¼" (W) x 1/8" (H)

WIR RX22-4N Architectural and Engineering Specifications

  • The receiver shall be a body-pack type with IR detector lens behind face of the unit.
  • The unit shall have a lanyard for hands-free operation.
  • The receiver shall have a rotary-type volume control.
  • The receiver shall operate for 60 hours with two AA alkaline batteries and for 30 hours per charge with NiMH AA batteries.
  • The receiver shall be charged without battery removal via charger contacts in the case. A drop-in charger accessory shall recharge the batteries in 16 hours when used with CHG 3512 charger.
  • The receiver shall be housed in an impact resistant plastic case with a hinged battery door that does not separate from the receiver.
  • The receiver shall receive 2.3 MHz, 2.8 MHz, 3.3 MHz or 3.8 MHz modulated IR signals with 50 µS de-emphasis. The receiver shall have a 3.5 mm stereo phone jack and accommodate low-impedance mono or stereo earphones and headphones.
  • The receiver shall accommodate neckloop telecoil couplers.
  • The receiver shall provide 125 dB SSPL90 output with HED 021 headphone and 110 dB SSPL90 with EAR 013 earbud-type earphone.
  • The system electrical frequency response shall be 25 Hz to 16 kHz, +1, -3 dB and the S/N ratio shall be 60 dB.
  • The receiver shall have CE, FCC RoHS and WEEE approval. The receiver shall be covered by a five-year parts and labor warranty, excluding earphones, headphones, batteries and chargers.
  • The receiver shall be the Williams Sound model WIR RX22-4.

WIR RX22-4N

Receiver Style:

Body-Pack, dual-lens detector, lanyard

Size:

4.1" L x 2.85" W x 1.2" H (104.1 mm x 72.4 mm x 30.4 mm)

Weight:

4.5 oz (127 g) with batteries

Color and Material:

Black

Lanyard:

3 ft (0.91 m), allows receiver to be worn around the neck

Operating Temperature:

-10° C to +50° C

Battery Type:

2 x AA, alkaline (BAT 001-2) or NiMH (BAT 026-2)

Battery Life:

Alkaline: 60 hours, NiMH: 30 hours/charge

Battery Drain:

25 mA, nominal

Charging Contacts:

For use only with CHG 3512

Carrier Frequency:

Channel 1: 2.3 MHz, Channel 2: 2.8 MHz

Channel 3: 3.3 MHz, Channel 4: 3.8 MHz

De-Emphasis:

50 uS

FM Deviation:

±50 kHz

Signal-to-Noise Ratio:

60 dB min.

Squelch:

Receiver squelches (mutes) at 40 dB S/N ratio

Frequency Response:

25 Hz to 16 KHz, +1 dB, -3 dB, electrical response

Total Harmonic Distortion:

Less than 1%, electrical response

Controls:

ON/OFF/VOLUME: combination thumbwheel knob

Channel Selector: four-position rotary switch

Indicators:

Red LED “ON" indicator, flashes to indicate Low battery

Audio Output Jacks:

3.5 mm stereo mini phone jack Accepts 3.5 mm mono or stereo phone plug

Audio Output Power:

15 mW max at 32 Ω

Acoustic Output:

125 dB SSPL90 with HED 021; 110 dB SSPL90 w/ EAR 013

Sensitivity:

Better than 1 nW/cm2 for 40 dB signal-to-noise ratio

Approvals:

CE, FCC, RoHS, WEEE

Warranty:

5 years on receiver, 90 days on accessories

Compatible Headphones/Earphones:

Mono or stereo, 8-32 ohms, 3.5 mm mini phone plug, HED 021, HED 026, EAR 013, EAR 014, EAR 022, NKL 001

WIR TX75 C Architectural and Engineering Specifications

  • The infrared transmitter shall consist of an all in one modulator and emitter operating on 2.3/2.8 MHz or 3.3/3.8MHz. The carrier frequency shall use 50kHz deviation and 50µS pre-emphasis.
  • The transmitter shall have a minimum coverage of 12,000 sq ft with the WIR RX22-4 receiver in single-channel mode.
  • The transmitter shall be housed in a heavy-duty black plastic enclosure with a durable infra-red transparent front lens. It shall be convection cooled without fans. The transmitter includes an omni-directional mounting bracket for various permanent installations.
  • The transmitter shall have a line level phoenix jack input for each of the channels. Each channel shall have an audio input level LED. There shall be a single 3.5mm microphone input with gain control. The mic input shall have a channel selector switch.
  • The transmitter shall have a switch to turn off all indicator LED’s.
  • The transmitter shall have two RJ45 outputs supplying power and baseband signal to two WIR TX75-S slave emitters via CAT-5e cable. Each RJ45 output shall have a green and yellow LED signaling that the slave emitters are receiving power and baseband signal. A single CAT-5e cable supplies power, signal and digital control to the slave unit up to 100 ft from the transmitter.
  • The transmitter shall be powered by a 48VDC universal power supply, 50-60Hz, 100-240 VAC input, 19.2W.
  • The transmiiter shall be covered by a two-year parts and labor warranty, 90 days on accessories.
  • The transmitter operating on 2.3/2.8 MHz shall be the Williams Sound model WIR TX75 C.
  • The transmitter operating on 3.3/3.8 MHz shall be the Williams Sound model WIR TX75 D.

WIR TX75 C

Dimensions, Weight:

10.0" W (25.4 cm) x 3.1" D (7.9 cm) x 1.5" H (3.8 cm) w/o faceplate or 2.5" H (6.4 cm) w/faceplate, 0.6 lbs (0.3kg)

Color:

Black with silver colored silk screen and silver colored faceplate

Optional: white colored faceplate

Power Supply:

Desktop style international power supply with IEC line cord, 100-240 VAC input, 50-60Hz, 24W; 48VDC output

DC Power Input:

2.5mm ID barrel connector, 48 VDC, 0.4A center positive

Power Indicator:

Green LED

Sleep/Power Save Mode:

Shuts off carrier when no audio is present for 3 minutes

Modulation:

FM Wideband, ±50kHz deviation max, 50 μS pre-emphasis

Carrier Frequencies:

WIR TX75 C: 2.3 MHz (Ch1) and 2.8 MHz (Ch2)

WIR TX75 D: 3.3 MHz (Ch1) and 3.8 MHz (Ch2)

Default at power on = carriers off. Carriers are automatically enabled upon presence of audio.

Emitter IR Power:

0.7 W

Master Only Coverage Area
(minimum, 1-Ch mode):

12,000 sq. ft. (464 sq. m.) in single-channel mode with the RX22-4 receiver

6,000 sq. ft. (557 sq. m.) in single-channel mode with the RX15-2 receiver

4,000 sq. ft. (186 sq. m.) in single-channel mode with the RX18 receiver

Audio Inputs / Controls:

Line inputs: Phoenix Contact® connectors for Ch1 and Ch2 accept line level, balanced or unbalanced audio

Microphone input:

3.5 mm, stereo jack with signal and bias connected to tip, electret microphone compatible (4 VDC bias supply with 2.7k ohm series resistor)

Microphone gain adjust:

Rotary potentiometer

Microphone channel switch:

Selects microphone input to Ch1 or Ch2

Audio indicators:

Yellow LED blinks at nominal audio level. One per channel

Indicators On/Off:

2-position switch turns on/off indicator lights

“to slave" Output/Input:

(2) 8p8c RJ45 connectors output 48VDC 0.4A power, baseband RF and a bi-directional RS-485 bus for control and status communications

Slave Status Indicators
(on “to slave" jacks):

Green: Power/Unit Status

Yellow: Transmit/Cable Status

Signal-to-Noise Ratio:

70 dB, (line input)

Frequency Response:

95Hz to 17.6kHz, -3dB re 1kHz (line inputs)

125Hz to 17.0KHz, -3dB re 1kHz (microphone input)

Total Harmonic Distortion:

<1% (1 kHz, nominal deviation, line or microphone input)

Operating Requirements:

0-50° C (32°-122°F)

Mounting Kit:

Wall or Ceiling mount: BKT 024 Omnidirectional mount

Optional: slave linking bar (MLB 003)

Warranty:

5 Years

Approvals:

CE, C-tick, FCC, Industry Canada, WEEE, RoHS, CB Scheme

Compatible Receivers:

WIR RX22-4, WIR RX18, WIR RX15-2

Other Models

WIR SYS 7522 PRO c  2.3/2.8 MHz

WIR SYS 7522 PRO d  3.3/3.8 MHz

and add the following suffix for line cord:
-01: Euro power cord
-02: UK power cord
-04: Australia power cord

Accessories for WIR SYS 7522 PRO

All Williams Sound headphones and earphones are compatible with this product.

Earphones
Headphones

BAT 001-2 Two AA alkaline batteries

HED 021 Folding headphones

MLB 003 Linking Bar for WIR TX75

downloads

Download/View Name Type Language
WIR TX75 C/D Quick Setup Guide Manuals English
Infrared Brochure - High Res Brochures English
WIR TX75 C/D Manual Manuals English

Videos

We have no other products in this category.