Designed for the European marketplace, the TGS 863 system ensures the tour group hears every word the guide speaks for an unforgettable experience. Communication between guide and participant is effortless. Multi-channel compatibility provided for multiple tour groups and multi-language interpretation.
Note: The operating frequency on the TGS 863 system is optimized for European markets. The system can not be used in all countries. Check with your government´s radio regulations for 863 MHz operation.
(1) T863 transmitter
(20) R863 receivers
(1) MIC 100 rear-wear headset microphone
(1) CCS 036 system carry case
(42) BAT 001 AA alkaline batteries
Earphones sold separately.
Dimensions: |
115 mm H x 72 mm W x 30 mm T |
Weight: |
85 grams (3 oz.), no batteries |
Color: |
Black |
Material: |
ABS/Polycarbonate, shatter-resistant |
Battery Type: |
Two (2) AA 1.5 V Non-rechargeable Alkaline batteries |
Operating Frequencies: |
CH 1 - 863.25 MHz; CH 2 - 863.75 MHz; |
Operating Range: |
30 meters (98.4 feet) with T863 transmitter |
Stability: |
± .05 MHz, 0 - 50° Celsius |
FM Deviation: |
60 kHz ±5 kHz, transmitter input at 1 kHz, 2.5 mV |
De-Emphasis: |
50 µS |
Sensitivity: |
< - 90 dBm @ 60 kHz deviation |
Squelch: |
-100 dB @ 6 kHz |
Freq Response: |
500 Hz - 5 kHz, ±3 dB |
Distortion: |
< 2.0% THD |
Signal–Noise Ratio: |
>50 dB ( ± 5 dB) with transmitter input at 1 kHz, 2.5mV |
Antenna: |
Internal wire monopole |
Controls & Indicators: |
Volume control knob: Channel selector (four position rotary switch): Position 1 is off; position 2 is CH1; position 3 is CH 2; position 4 is CH 3 Power on indicator: Red LED “on" indicates when receiver has power Low battery indicator: Power LED flashes when batteries are low Battery selector: Slide switch for alkaline or NiMH battery operation |
Headphone jack: |
3.5 mm jack, mono output, 8-32 ohm impedance |
Charging Contacts: |
Designed for use with CHG 3512 Battery Charger and CHG 3502 |
Approvals: |
CE, RoHS, WEEE, ETSI EN 301 357-1, ETSI EN 301 357-2 |
Warranty: |
3 years parts and labor (90 days on accessories) |
Dimensions: |
4.1" L x 2.8" W x 1.1" H (104 mm x 71 mm x 28 mm) |
Weight: |
2.6 oz (74 g), no batteries |
Color: |
Black, shatter-resistant PC/ABS plastic |
Battery Type: |
Two (2) AA 1.5 V non-rechargeable Alkaline batteries (BAT 001), 70 mA nominal current drain, 30 hours approx. life Two (2) AA 1.5 V NiMH rechargeable batteries (BAT 026), 70 mA nominal current drain, 20 hours per charge approx., recharges in 14–16 hours, uses CHG 3502 or CHG 3512 Charger |
Operating Frequencies: |
Selectable, 16 channels, 72.1 – 75.9 MHz* (channels 1-8 correspond with R35-8 receiver channels and PPA R1600) |
Stability: |
± .005%, frequency synthesized, crystal reference, PLL |
Modulation: |
Wide-band FM, 75 kHz pk, 75 µS pre-emphasis |
RF Output: |
80 mV/m at 3 m (max. allowed by FCC rules) |
Frequency Response: |
200 Hz to 13 kHz, ± 3 dB at 1% max. THD |
Signal-to-Noise Ratio: |
65 dB (typical) transmitted |
Transmit Antenna: |
Integral with microphone cord |
Microphone: |
Electret type, 3.5 mm mono phone plug |
External Controls: |
Momentary push button: push and hold 3 seconds for power On/Off, push and release for microphone mute On/Off; Rotary sixteen channel switch (with internal channel lock switch) |
Mic Input: |
3.5 mm mono phone jack with electret mic bias, internal adjustable gain with 25 dB range |
Aux Input: |
2.5 mm stereo phone jack, internal adjustable gain with 60 dB range |
Audio Compression: |
1:1 or 2:1 ratio selected with internal slide switch |
Compatible Receivers: |
PFM R31, PFM R32, PFM R33, PFM R36, PPA R35, PPA R35-8, PPA R1600 |
Approvals/Directives: |
FCC, Industry Canada, RoHS, WEEE |
Warranty: |
5 years, parts and labor (90 days on accessories) |
We have no other products in this category.