Dimensions:

115 mm H x 72 mm W x 30 mm T
(4.5" H x 2.85 W x 1.2" T)

Weight:

85 grams (3 oz.), no batteries

Color:

Black

Material:

ABS/Polycarbonate, shatter-resistant

Battery Type:

Two (2) AA 1.5 V Non-rechargeable Alkaline batteries
(BAT 001), 50 mA nominal current drain, 40 hours approx. life
(OR)
Two (2) AA 1.2 V NiMH Rechargeable batteries (BAT 026),
50 mA nominal current drain, 30 hours per charge approx., recharges in 14–16 hours, uses CHG 3512 Multiple Battery Charger

Operating Frequencies:

CH 1 - 863.25 MHz; CH 2 - 863.75 MHz;
CH 3 - 864.75 MHz ( ± 30 kHz)

Operating Range:

30 meters (98.4 feet) with T863 transmitter

Stability:

± .05 MHz, 0 - 50° Celsius

FM Deviation:

60 kHz ±5 kHz, transmitter input at 1 kHz, 2.5 mV

De-Emphasis:

50 µS

Sensitivity:

< - 90 dBm @ 60 kHz deviation

Squelch:

-100 dB @ 6 kHz

Freq Response:

500 Hz - 5 kHz, ±3 dB

Distortion:

< 2.0% THD

Signal–Noise Ratio:

>50 dB ( ± 5 dB) with transmitter input at 1 kHz, 2.5mV

Antenna:

Internal wire monopole

Controls & Indicators:

Volume control knob: Channel selector (four position rotary switch): Position 1 is off; position 2 is CH1; position 3 is CH 2; position 4 is CH 3

Power on indicator: Red LED “on" indicates when receiver has power

Low battery indicator: Power LED flashes when batteries are low

Battery selector: Slide switch for alkaline or NiMH battery operation

Headphone jack:

3.5 mm jack, mono output, 8-32 ohm impedance

Charging Contacts:

Designed for use with CHG 3512 Battery Charger and CHG 3502

Approvals:

CE, RoHS, WEEE, ETSI EN 301 357-1, ETSI EN 301 357-2

Warranty:

3 years parts and labor (90 days on accessories)

Dimensions:

21.8 cm (8.6") W x 21.8 cm (8.6") D x 4.6 cm (1.8") H

Weight:

1.32 kg (2.9 lbs)

Color:

Black with white legends

Power:

AC: 100 to 240 VAC, 50-60 Hz, 400 mA, power inlet IEC C14
DC: 12 to 13 VDC, 800 mA, 2.1 mm DC input jack

Power Switch:

Push ON - push OFF switch with red light

Temperature Range:

Operating: 0 C to 40 C (+32 F to 104 F)

Storage:

-20 C to 70 C (-4 F to +158 F)

Operating Frequencies:

Selectable: Ch 1= 863.250 MHz, Ch 2 = 863.750 MHz, Ch 3 = 864.750 MHz, 13 other frequencies available (see manual)

RF Output:

5 to 10 dBm (full power switch)

RF Switch:

Low/ Full power switch on rear panel

LCD Display:

Backlit, Ch #, frequency, user name, audio level VU (indicated by 11 segments total)

Menu Push Buttons:

Menu, +Ch select, -Ch select, SET

Headphone Output:

Mono, 1/4" tip barrel jack, 0.35mW power into 33 ohms, level adjust on front panel

Stability:

+/- .05 MHz (0 C to 40 C)

FM Deviation:

45 kHz (line input, L+R, 1 kHz, 0.5 Vrms)

Pre-Emphasis:

50 µsec

Nominal Range:

Up to122 meters (400 ft) at RF switch full power with Williams Sound R863 receiver

Frequency Response:

Line input: 25 to 10.0 kHz +- 3 dB
Microphone input: 110 to 8.5 kHz +/- 3 dB. Dynamic microphone only

Signal/Noise Ratio (1 kHz):

Line input: > 50 dB
Microphone input: > 40 dB

%THD + noise (1 kHz):

Line input: < 0.4%
Microphone input: < 0.5%

Audio Processing:

2:1 compression (line or microphone input)

Audio Input:

Line input: mono, RCA jack x 2 (labeled left and right) Microphone input: Balanced/unbalanced, combo XLR (3 pin) or 1/4" TRS jack, Dynamic mic only

Audio Levels: (at FM deviation)

Line input: 0.5 Vrms (-6 dBV), rotary gain adjust rear panel at maximum
Microphone input: 10 mVrms (-40 dBV), rotary gain adjust rear panel at maximum

Common Mode Rejection:

Microphone input: > 22 dB @ 1 kHz, balanced input

Antenna:

22.9 cm (9") long, semi flexible, adjustable, removable, rear panel TNC type connector

Compatible Receivers:

R863

Approvals:

CE, RoHS, WEEE, ETSI EN 301 357-1, 2

Warranty:

3 years*