DWS PCS 3 300

Digi-Wave Personal Communication System

Product Highlights

  • Patented, interference-reduction technology provides seamless, secure operation
  • Convenient dock charger
  • Legal for use in most countries

Description

One-way, digital technology that makes it easier to hear in everyday situations by reducing background noise and compensating for poor room acoustics or distance from the sound source. Beneficial for an array of personal listening scenarios—from conversations around the coffee table to hearing every word of your favorite TV program. Simply place the DLT 300 near the sound source.

System Includes

(1) DLT 300 Transceiver*
(1) DLR 360 Receiver
(1) MIC 090 Lapel Microphone
(1) EAR 041 Earphone
(1) CCS 044 Silicone Skin
(1) CCS 060 Silicone Skin
(1) CHG 102 Dual-Bay Charger
(1) BAT 022-2 AAA Rechargeable Batteries
(1) CCS 043 system carry case

*Each DLT 300 is packaged with an individual charger.

digiwave
Dws pcs 3 300 nb

Features

  • Crystal-clear audio
  • Multiple channels available
  • Patented, interference-reduction technology provides seamless, secure operation
  • 2.4 GHz operation works well in RF-saturated environments
  • Range of up to 100 feet outdoors/200 feet indoors (depending on environmental conditions).
  • Legal for use in most countries
  • 2-year-warranty

Specifications

DWS PCS 3 300 Architectural and Engineering Specifications

See specifications for: DLT 300 and DLR 360

DWS PCS 3 300

See specifications for: DLT 300 and DLR 360

BAT 022-2

NiMH, 1.2 Volt, 950 mAh

CHG 102

Compatible units

Transceivers: DLT 300, DLT 100 2.0, DLT 100

Receivers: DLR 360, DLR 60 2.0 and DLR 60

Power input

110—240V AC @ 50-60 Hz

Power output

5 volts DC @ 1.2 amps

Cable length

6’ (1.8 meters)

Warranty

90 days

DLR 360 Architectural and Engineering Specifications

The receiver shall be a digital receiver operating on the 2.4GHz ISM band.  It shall have the ability to communicate with the DLT 300 transceiver.
The receiver shall be housed in plastic enclosure 3.54" H x 2.36" W x 0.63" D (90 mm x 60 mm x 16mm) and have an LCD on the front panel. It will have a 30-pin connector supporting audio output and charging capability. It shall support recharging of NiMH batteries when used with Williams Sound compatible chargers or docking station.
The receiver shall have a battery life up to 24 hrs with two AAA Alkaline batteries, and up to 18 hrs with two NiMH batteries. It’s power will automatically shut off after approximately five minutes when no RF signal is detected from any compatible devices.
The receiver shall have 3.5mm mono/stereo headphone jack with all controls on the front of the unit. The receiver shall operate 15 simultaneous channels and shall have a 65 dB (A weighted) S/N ratio with an audio frequency response of 140 Hz to 11.5 kHz in Conference Mode and Interpreter Mode, and 140 Hz - 7.6 kHz in Intercom Mode.
The transceiver shall have power, vol +, vol -, v and ^ buttons.
The transceiver shall have FCC, Industry Canada, CE approvals and be RoHS, WEEE and RCM compliant.
The receiver shall have a two year parts and labor warranty (90 days on headphones and earphones).
This receiver shall be the Williams Sound model DLR 360.

DLR 360

These specifications are Preliminary and may be subject to change without notice.

Dimensions:

2.36" W x 3.54" H x 0.63" D

(60 mm x 90 mm x 16 mm)

Weight:

1.7 oz. (47 g) without batteries.

Frequency Band:

2.4 GHz (ISM band)

Modulation:

FSK

Multi Channel:

Up to 15 simultaneous channels (one way mode)

Case Material:

Black ABS Plastic

Battery Type:

2 x AAA Alkaline or NiMH

Battery Life:

Alkaline Disposable (BAT 010-2): Up to 24 hrs

NiMH Rechargeable (BAT 022-2): Up to 18 hrs

Power Save:

Auto Sleep Mode after 5 minutes of no RF signal from compatible devices

Audio Frequency Response:

(-3dB knee level)

Conference Mode:  140 – 11.5 KHz

Intercom Mode:  140 – 7.6 KHz

SNR:

65 dB (A-weighted)

THD:

0.1% (typical)

Antenna:

Internal

Headphone Audio Output:

3.5 mm stereo jack with mono output for headphones, earphones, or neckloop

27 mW maximum @33Ω mono

Internal Speaker (disabled when headphone jack in use)

Controls:

Power, Volume +/-, Channel +/-, Setup, Battery Type

Display:

LCD shows status: Battery Level, RSSI, Group/Channel#

Indicators:

Red LED - blinks when charging

Green LED - stays on when charged

Docking Connector:

30-pin iPod Style for charging and audio out

Compatible Transmitter:

DLT 300 only

Temp. Range:

32° – 122°F  (0° to 50°C)

Optional Chargers:

2-bay CHG 102, 12-bay CHG 1012, TFP 045

Accessories:

Silicone Skin, Lanyard, Wrist Strap

Approvals:

FCC, Industry Canada, RoHS, CE, WEEE, RCM

Warranty:

2 years parts and labor (90 days on accessories)

DLT 300 Architectural and Engineering Specifications

The transceiver shall be a digital transceiver operating on the 2.4 GHz ISM band utilizing FSK modulation with patented frequency-hopping software to reduce interference potential. It shall be compatible with the DLR 360 Receiver. It shall be housed in plastic enclosure 4.07" H x 2.43" W x 0.44" D  (103.3 x 61.8 x 11.3 mm), have an internal rechargeable Lithium Polymer battery with smart charge built into the transceiver and an LCD on the front panel displaying, battery level, mode, time, channel number, group number, and number of other DLT’s with the talk button on (up to 6). It shall have a built-in microphone and speaker for users opting not to use a headset.
The transceiver shall have a battery life up to 14 hrs per charge and take approximately 5 hrs to reach full charge. Power will automatically shut off after approximately five minutes when no RF signal is detected from any compatible devices.
The transceiver shall operate in one-way or two-way mode (up to six speakers in a group at any given time) and have a range of up to 300 ft in two-way mode indoors and up to 200ft outdoors.
The transceiver shall have power, vol +, vol -, talk, CH +, CH -, v, GRP and ^ buttons. It shall have an illuminated talk button with a tactile braille dot.
The transceiver shall have a menu setup mode via front panel buttons configurable for (1 or 2-way operation), (master or guest operation) and (floor + 14 language portable interpretation where common floor language is used).
The transceiver shall have 3.5mm mono/stereo microphone and headphone jacks, all controls are on the front of the unit and a multi-pin style jack on the bottom provides battery charging access.
The transceiver shall operate 15 simultaneous channels in interpretation mode, support 4 simultaneous groups in two-way mode, allow a maximum of 4 simultaneous talkers in 2-way mode, and a maximum of 6 simultaneous talkers in Intercom Mode. It shall have a repeater mode to increase the range of the system.
The transceiver shall have a 74 dB (A weighted) SNR with a frequency response of 140 Hz to 11.5 kHz in Conference and Interpreter Modes and 140 Hz - 7.6 kHz in Intercom Mode.
The transceiver shall have FCC, Industry Canada, CE approvals and be RoHS, WEEE and RCM compliant.
The transceiver shall have a two year parts and labor warranty (90 days on headphones, battery, charger and earphones).
This transceiver shall be the Williams Sound model DLT 300.

DLT 300

Dimensions 4.07"W x 2.43"H x 0.44"D (103.3 mm x 61.8 mm x 11.3 mm)
Weight 2.9 oz (82 g)  including battery
Color Black/Silver (Front/Back)
Case Material Black ABS plastic
Battery type Lithium Polymer with smart charge built into transceiver; 2000 mAH
Battery life Up to 14 hrs talk time per charge Current consumption range: 39 mA @ idle to 94 mA w/1 Ch Tx and 3 Ch Rx
Power Save Auto Sleep Mode after 5 minutes of no RF signal from compatible devices
Charge time 5 hrs. TFP 045 with cable and international adapters
Optional Chargers 2-bay CHG 102, 12-bay CHG 1012, TFP 045
Simultaneous Channels/Groups/Talkers Up to 15 simultaneous channels (0-14) (Interpretation mode) Up to 4 simultaneous groups (2 way mode) Up to 4 simultaneous talkers per group (2-way mode) Up to 6 simultaneous talkers per group (2-way Intercom mode)
Operating frequencies 2.4 GHz (ISM band);  2402 – 2476 MHz FHSS
Audio Frequency response (-3dB Knee Level) Conference Mode, Interpreter Mode:  140 – 11.5 KHz Intercom Mode:  140 – 7.6 KHz
SNR 74 dB (A-weighted, Maximum output)
THD 0.33 %
Microphone input Internal microphone (disabled when MIC jack engaged) and 3.5 mm phone jack (tip/sleeve) with electret microphone bias, adjustable gain with 63dB range.
Headphone output 3.5 mm phone jack; 33 Ω load
Audio output Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041) Internal speaker (disabled when haedphone jack in use) <20mW @ 10% THD/RL = 33Ω
Range Up to 200 ft outdoors and 300 ft indoors (depending upon environmental conditions)
Modulation FSK
RF output 14 dBm Typical
Security 87 bit encryption, Secure Key Code, Setup Lock (SLOC)
Controls Front panel push buttons for volume up/down, group select, menu access and selection, timer, time, MIC on/off, power on/off, tone control SLOC access and Secure Key access. System reset button (rear panel)
Outputs 3.5 mm stereo/mono headphone jack; 30 pin charging jack with audio out to base stations
Side tone -12 dB below volume, tone variation  [ST:0 = Off, ST:1 = -6 dB, ST:2 = -12 dB]
Indicators LCD (Group, channel, volume level, battery status, mode, number of people with talk button on)
LED’s (charge status) Red LED around talk button when enabled.
Docking Connector 30-pin Connector for charging and audio in/out
Compatible Receiver DLR 360 only
Approvals FCC, Industry Canada, CE, RoHS, WEEE, RCM
Warranty 2 years parts and labor (90 days on accessories); 6 months on internal battery

EAR 041

Style Single, in-ear, isolation earphone
Plug 3.5mm mono
Cord 39"
Driver Size 10 mm
Nominal Impedance 16Ω
Freq. Response 20 - 20kHz
Weight 6g
Max Power Input 5 mW
Sensitivity 104 dB @ 1kHz
Replacement Silicone Tip EAR 043 (0ne pair)

MIC 090

Color

Black

Weight

15 g (0.5 oz)

Plug

3.5mm mono

Cord

39"

Phantom Powered

No

Nominal Impedance

1500Ω @ 1kHz

Operating Voltage

1.5 - 10VDC

Freq. Response

20 - 18kHz

Pick-Up Pattern

Omni-direct

Transducer Type

Back electret

Max Input Sound Level

110dB SPL

Sensitivity

-56dB ± 3dB

Replacement Windscreen

WND 090

Replacement Lapel Clip

CLP 090

Warranty

90 days

Accessories for Digi-Wave Personal Communication System [DWS PCS 3 300]

All Williams Sound headphones and earphones are compatible with this product.

Earphones
Headphones

BAT 010-2 Two AAA alkaline batteries

BAT 022-2 Two AAA NiMH rechargeable batteries

CHG 102 Digi-Wave charger, 2-bay

DW ACC PAC Charger Pack for DLT, DLR

EAR 008 Over-ear, hook earphone

EAR 013 Single mono earbud

EAR 013 T Single Mini Earphone w/ Eartip

EAR 014 Dual Mini Earbuds

EAR 014 T Dual mini earbud w/ Eartips

EAR 022 Surround Earphone

EAR 041 Single, in-ear, isolation earphone

EAR 042 Dual, in-ear, isolation earphones

HED 008 Hearing-protector, dual headphones

HED 021 Folding headphones

HED 024 Stereo Headphones

HED 026 Rear-wear, mono headphones

HED 027 Heavy-duty, folding, mono headphones

HED 040 Hearing-protector, dual ear muff headphones

MIC 014-R Plug Mount Mic

MIC 020 Lightweight rear wear mic

MIC 044 Noise-Cancelling Mic

MIC 044 2P Noise-Cancelling 2-plug Headset Mic

MIC 045 Dual-ear noise-cancelling headset microphone

MIC 054 Directional lapel mic

MIC 058 Dual muff headset microphone

MIC 068 Heavy-duty dual-muff headset microphone

MIC 088 Dual muff hardhat headset microphone

NKL 001 Neckloop 18" (mono plug)

downloads

Download/View Name Type Language
Digi-wave 300 Series Manual - Portuguese Manuals Portuguese
Digital Brochure - Low Res Brochures English
Digi-wave 300 Series Manual Manuals English
Digital Brochure - High Res Brochures English
Digi-wave 300 Series Specifications Specifications English

Videos

We have no other products in this category.