Discontinued

DWS INT 5 PRO

Digi-Wave Language Interpretation System

Product Highlights

  • Multiple interpreters/listeners
  • Full day use — single charge

Description

The DWS INT 5 PRO is a completely portable, wireless, single-speaker plus 4-language interpretation system. Ideal for up to four languages, plus floor.  Up to 50 listeners.  Space for up to 70 receivers per tray.  Ideal when security, sound quality and flexibility are critical. Designed for small - to medium-size conferences, meetings or other events where one language is shared by four interpreters. System can serve up to 50 listeners. Additional DLT 100 2.0's can be purchased separately to accommodate up to 14 additional languages. Additional DLR 60 2.0's can be purchased separately to accommodate additional listeners. Can serve unlimited number of listeners within recommended range.


DWS INT 5 PRO is ideal for a one floor / four interpreter scenario:
One DLT 100 2.0 transceiver is set up as body-worn transmitter to provide a direct audio feed from a speaker to four interpreters. Interpreters 1, 2, 3 and 4 then use DLT 60 2.0's to both listen to the speaker and transmit their simultaneous interpretation to the audience on 4 separate channels.  The audience, using DLR 60 2.0's, can tune in any of these channels (they can toggle back and forth between CH 0 for floor speaker and CH 1-4 for interpreted languages).

System Includes

(5) DLT 100 2.0 transceivers*
(50) DLR 60 2.0 receivers**
(50) BAT 022-2 AAA NiMH rechargeable batteries
(4) MIC 058 dual-headset microphones
(50) EAR 022 surround earphones
(1) CHG 1012 12-bay, drop-in charger
(1) CCS 049 heavy-duty carry case
(4) CCS 044 BK silicone skins (Black)
(1) CCS 044 GR silicone skin (Gray)

*Each DLT 100 2.0 is packaged with an individual charger
 
**Rechargeable batteries optional for DLR 60 2.0 receivers (BAT 022-2) - sold separately.
digiwave
Dws int 5 pro

Features

  • Can accommodate floor (or common) language, plus 4 languages (expandable up to 14 languages)
  • Quick set-up
  • No base station, console or mixing board needed.
  • Lightweight — saves on shipping costs
  • Expandable solution — can grow with your needs
  • 2.4GHz operation — legal for use in most countries
  • All-day operation on a single, full charge
  • Any number of listeners (with DLR 60 2.0 receivers)
  • IC-2 Interpreter’s Control Console(s) also can be integrated for interpreter’s booth.

Specifications

BAT 022-2

NiMH, 1.2 Volt, 950 mAh

CCS 049

Case Exterior Dimensions:

26.2"L x 19.7"W x 13.2"H  (66.5 cm L x 50 cm W x 33.5 cm H)

Case Interior Dimensions:

23.2"L x 16.7"W x 11.6"H  (58.9 cm L x 42.4 cm W x 29.5 cm H)

Slot Dimensions:

2.75"L x 1.25"W x 4"D  (7 cm L x 3.2 cm W x 10.2 cm D)

Open Tray Interior Dimensions:

21"L x 14.5"W x 4"D  (53.3 cm L x 36.8 cm W x 10.2 cm D)

Weight:

23 lbs.  (10.4 kg)

Case Material:

Black, ABS plastic

Unit Capacity:

140 Units

Warranty:

90 days

CHG 1012 Architectural and Engineering Specifications

The charger shall be a 12-bay, drop-in charger for use with the Digi-Wave™ DLT 300, DLT 100 2.0, DLT 100, DLR 60 2.0 and DLR 60.

The charger be enclosed in black ABS plastic, 9" x 7" x 1.6" and weigh 2.0 lbs excluding power supply.

The charger shall have a five-hour nominal charge cycle. Battery status and charge indication are provided on the DLT or DLR unit. 

The charger shall be powered by an external universal power supply (90-240 VAC input; 5 VDC, 6A output) via a DC barrel connector.

Eight separate chargers, each powered by its own TFP 047 power supply, can be connected to one 15 amp circuit.

The charger shall have CE approval and be RoHS, WEEE, Industry Canada, FCC and CB scheme compliant.

This charger shall be the Williams Sound model CHG 1012.  

The charger housed in a carry case shall be Williams Sound model CHG 1012 PRO.

CHG 1012

Dimensions:

CHG 1012 (charger only):  9"L x 7"W x 1.6"H (23 cm L x 17.8 cm W x 4 cm H) 

CHG 1012 PRO (case dimensions):  18"L x 14"W x 6.75"H (47.7 cm L x 35.5 cm W x 17.1 cm H) 

Weight:

CHG1012: 3.3 lbs (1.5 kg), including power supply

CHG1012 PRO: 9.4 lbs (4.26 kg), including power supply

Enclosure:

Black, ABS plastic with metal base

Power Supply Input:

TFP 047, 90-240 VAC input, 1.5 A max *

Power Supply:

Universal DC adapter, 5 VDC - 6A output, center positive

Charging Time:

5 hours nominal **

Unit Capacity:

12 Units

Compatible Units:

Transceivers: DLT 300, DLT 100 2.0, DLT 100

Receivers: DLR 360, DLR 60 2.0, DLR 60

Indicators:

Charge status indicators on  DLT or DLR

Warranty:

2 year (cables and power supply warranty for 90 days)

Approvals:

CE, FCC, WEEE, RoHS, CB

Warranty:

2 year (case, cables and power supply warranty for 90 days)

DLR 60 2.0 Architectural and Engineering Specifications

The receiver shall be a digital receiver operating on the 2.4GHz ISM band utilizing GFSK modulation.It shall have the ability to communicate with the DLT 100 transceiver. It shall be housed in plastic enclosure 2.36" W x 3.54" H x 0.63" D (60 x 90 x 16mm) and have an LCD on the front panel. It will have a 30-pin connector supporting audio output and charging capability. It shall support recharging of NiMH batteries when used with Williams Sound compatible chargers or docking station. The receiver shall have a battery life up to 24 hrs with two AAA Alkaline batteries, and up to 20hrs with two NiMH batteries. Power will automatically shut off after approximately one minute when not operating with other compatible devices. The receiver shall have a range of up to 200 ft indoors and up to 100 ft outdoors. The receiver shall have 3.5mm mono/stereo headphone jack with all controls on the front of the unit. The receiver shall operate 15 simultaneous channels and shall have a 65 dB (A weighted) S/N ratio with a frequency response 150 Hz to 11 kHz.


The receiver shall have FCC, CE, C-tick and Industrie Canada approvals and be RoHS and WEEE compliant. The receiver shall have a two year parts and labor warranty (90 days on headphones and earphones).


This receiver shall be the Williams Sound model DLR 60.

DLR 60 2.0

Dimensions:  

  2.36" W x 3.54" H x 0.63" D  (60 mm x 90 mm x 16 mm)

Weight: 

  1.7 oz. (47g) without batteries.

Frequency Band: 

  2.4 GHz (ISM band)

Modulation: 

  GFSK digital transmission

Range: 

  Up to 100 ft outside, Up to 200 ft inside

Multi Channel: 

  Up to 15 simultaneous channels (one way mode)

Case Material: 

  Black ABS Plastic

Battery Life: 

  Alkaline Disposable (BAT 010-2): Up to 27 hrs

  NiMH Rechargeable (BAT 022-2): Up to 21 hrs

Battery Type: 

  2 x AAA Alkaline or NiMH

Power Save: 

  Auto Sleep Mode after 5 min of no RF signal

Frequency Response: 

  150 Hz – 11 kHz

S/N Ratio: 

  65 dB (A weighted)

THD: 

  0.45%

Antenna: 

  Internal

Output: 

  60 mW

  3.5 mm stereo jack with mono output for Headphones/Earphones

  Back Speaker (muted when headphone jack in use)

Controls: 

  Power, Volume +/-, Channel +/-, Setup, Battery Type

Display: 

  LCD shows status: Battery Level, RSSI, Group/Channel#

Indicators: 

  Red LED - blinks when charging

  Green LED - stays on when charged

Docking Connector: 

  30-pin iPod Style for charging and audio out

Compatible Transmitter: 

  DLT 100

Temp. Range: 

  32° – 122°F  (0° to 50°C)

Chargers: 

  CHG 102, CHG 1012, Digi-Dock

Accessories: 

  Silicone Skin, Lanyard, Wrist Strap

Approvals: 

  FCC, Industrie Canada, RoHS, CE, WEEE, C-tick

Warranty: 

  2 years, parts & labor

 

 

DLT 100 2.0 Architectural and Engineering Specifications

  • The transceiver shall be a digital transceiver operating on the 2.4GHz ISM band utilizing GFSK modulation with patented frequency-hopping software to reduce interference potential. It shall be housed in plastic enclosure, have an internal rechargeable Lithium Polymer battery with smart charge built into the transceiver and an LCD on the front panel displaying signal strength, battery level, mode and time. It shall have a built-in microphone and speaker for users opting not to use a headset.
  • The transceiver shall have a battery life up to 14 hrs per charge and take approximately 5 hrs to reach full charge. Power will automatically shut off after approximately one minute when not operating with other compatible devices.
  • The transceiver shall operate in one-way or two-way mode (two speakers in a group at any given time) and have a range of up to 200ft in two-way mode indoors and up to 100ft outdoors.
  • The transceiver shall have power, vol +, vol -, talk, CH +, CH -, ^, GRP, v, buttons.
  • The transceiver shall have an illuminated talk button.
  • The transceiver shall have a menu setup mode via front panel buttons configurable for (1 or 2-way operation), (master or slave operation) and (floor and 14+ language portable interpretation where common floor language is used).
  • The transceiver shall have 3.5mm mono/stereo microphone and headphone jacks, all controls are on the front of the unit and a multi-pin style jack on the bottom provides battery charging access. USB charger compatible with iPod® chargers.
  • The transceiver shall operate 15 simultaneous channels in interpretation mode and 4 simultaneous groups in two-way mode. It shall have a repeater mode to increase the range of the system.
  • The transceiver shall have a 69dB (A weighted) S/N ratio with a frequency response of 150Hz to 11kHz.
  • The transceiver shall have FCC, Industrie Canada, C tick and CE approvals and be RoHS and WEEE compliant.
  • The transceiver shall have a two year parts and labor warranty (90 days on headphones, battery, charger and earphones).
  • This transceiver shall be the Williams Sound model DLT 100 2.0.

DLT 100 2.0

Dimensions

103 x 62 x 11mm (4.1 x 2.4 x 0.4 inches)

Weight

80g (2.8oz) including battery

Color

Black and silver

Enclosure

Shatter resistant PC/ABS plastic

Battery type

Li Polymer with smart charge built into transceiver

Battery life

Up to 14hrs talk time per charge

Charge time

5hrs. TFP 045 with cable and international adapters

Optional two-bay charger CHG 102

Channels

Up to 15 simultaneous channels (Interpretation mode)

Up to 4 simultaneous groups (2 way mode)

Operating frequencies

2.4GHz (ISM band) 2.402 – 2.476GHz FHSS

Frequency response

150 – 11KHz

S/N ratio

69dB (A weighted)

THD

0.33 %

Microphone input

Internal microphone (disabled when MIC jack engaged) and 3.5mm stereo jack
 

(tip/sleeve) with electret microphone bias, adjustable gain with 63dB range.

Audio output

Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041)
 

Internal speaker (disabled when ear jack engaged)
 

16mW @ 33Ω

Range

Up to 100ft outdoors and 200ft indoors*

Modulation

GFSK, binary CDMA

RF output

14dBm Max

Security code

87 bit encryption

Controls

Front push buttons for volume up/down, quick group select, menu access and selection, MIC on/off, power on/off, tone control, side-tone adjustment, SLOC access and Secure Key access. System reset button (rear of unit).

Output

3.5mm stereo/mono jack 30 pin charging jack

Side tone

Adjustable: Off (0dB), -6dB, -12dB below volume

Speaker

Internal speaker (disabled when ear jack is engaged)

Indicators

LCD (Group, channel, volume level, battery status, mode, signal strength)

LED’s

(charge status, voting) Red LED around talk button when enabled. Amber LED signifying voting feature activated.

Maximum presenters

Two presenters at any given time

Approvals

FCC, Industrie Canada, CE, C-tick, RoHS, WEEE

Warranty

2 years parts and labor (90 days on accessories)

EAR 022

Style

Around-ear speaker

Plug

3.5mm mono

Cord

39"

Driver Size

23 mm

Nominal Impedance

32Ω

Freq. Response

20 - 20kHz

Weight

15g

Max Power Input

30 mW

Sensitivity

118 dB @ 1kHz

MIC 058

 

Microphone

Type

Unidirectional electret

Sensitivity

-80 dB

Frequency Response

100-12 kHz

Impedance

150 Ω

Operating Voltage

1-10 VDC

 

Headphones

Driver Type

50mm, dynamic

Frequency Response

10 Hz-20 kHz

Impedance

46 Ω

Max SPL Out

96 dB

Max Power Input

100 mW

Plugs

Dual 3.5 mm

Replacement Mic Screen

WND 058

Replacement Earpads

EAR 058

Approvals

RoHS

Warranty

90 days

Accessories for Digi-Wave Language Interpretation System [DWS INT 5 PRO]

BAT 022-2 Two AAA NiMH rechargeable batteries

CCS 044 Silicone skin for DLT with lanyard and wrist strap

CCS 049 Large heavy-duty carry case (70 slot + tray)

CCS 060 Silicone skin for DLR with lanyard and wrist strap

CHG 1012 Digi-Wave charger, 12-bay

DW ACC PAC Charger Pack for DLT, DLR

EAR 008 Over-ear, hook earphone

EAR 013 Single mono earbud

EAR 013 T Single Mini Earphone w/ Eartip

EAR 014 Dual Mini Earbuds

EAR 014 T Dual mini earbud w/ Eartips

EAR 022 Surround Earphone

EAR 041 Single, in-ear, isolation earphone

EAR 042 Dual, in-ear, isolation earphones

HED 021 Folding headphones

HED 024 Stereo Headphones

HED 026 Rear-wear, mono headphones

HED 027 Heavy-duty, folding, mono headphones

HED 040 Hearing-protector, dual ear muff headphones

MIC 044 2P Noise-Cancelling 2-plug Headset Mic

MIC 058 Dual muff headset microphone

MIC 068 Heavy-duty dual-muff headset microphone

MIC 088 Dual muff hardhat headset microphone

NKL 001 Neckloop 18" (mono plug)

 

The DWS INT 5 PRO is a single main speaker (Floor) plus 4-language interpretation system.  It is set up to have one speaker (Floor) with a DLT 300, and four Interpreters with DLT 300's interpreting into four languages. All Interpreters listen to the Floor on Ch. 0 and each Interpreter speaks the interpreted language to the audience on Chs. 1-4. Using DLR 360's, the audience can listen to the main speaker (Floor) on Ch. 0 or any of the Interpreters on Chs. 1-4.

Videos

We have no other products in this category.