DLT 100 2.0

Digi-Wave Digital Transceiver

Product Highlights

  • Quick Group Change
  • Push-to-Talk
  • Adjustable Side Tone
  • Adjustable Talk "Off" Double Beep

Description

Transmits and receives. Slim, lightweight, and simple to set up and use. With the push of a button, users can access 2-way simultaneous communication for easy, more focused group leader / group member participation.

System Includes

(1) DLT 100 2.0 Transceiver

(1) TFP 045 Charger with cable

digiwave brian
DLT 100 2.0 Angle NB

Features

  • Quick Group Change enables the user to quickly change groups without the need to access the menu.
  • Push-to-Talk (PTT) provides a momentary talk button option for Slave Units in 2-way mode.
  • Side tone adjustment: 0db, -6dB and -12dB.
  • Talk "Off" double-beep indication gives the user an audible sound when the TALK button is turned off. Now adjustable up to volume level 37.

Specifications

DLT 100 2.0 Architectural and Engineering Specifications

  • The transceiver shall be a digital transceiver operating on the 2.4GHz ISM band utilizing GFSK modulation with patented frequency-hopping software to reduce interference potential. It shall be housed in plastic enclosure, have an internal rechargeable Lithium Polymer battery with smart charge built into the transceiver and an LCD on the front panel displaying signal strength, battery level, mode and time. It shall have a built-in microphone and speaker for users opting not to use a headset.
  • The transceiver shall have a battery life up to 14 hrs per charge and take approximately 5 hrs to reach full charge. Power will automatically shut off after approximately one minute when not operating with other compatible devices.
  • The transceiver shall operate in one-way or two-way mode (two speakers in a group at any given time) and have a range of up to 200ft in two-way mode indoors and up to 100ft outdoors.
  • The transceiver shall have power, vol +, vol -, talk, CH +, CH -, ^, GRP, v, buttons.
  • The transceiver shall have an illuminated talk button.
  • The transceiver shall have a menu setup mode via front panel buttons configurable for (1 or 2-way operation), (master or slave operation) and (floor and 14+ language portable interpretation where common floor language is used).
  • The transceiver shall have 3.5mm mono/stereo microphone and headphone jacks, all controls are on the front of the unit and a multi-pin style jack on the bottom provides battery charging access. USB charger compatible with iPod® chargers.
  • The transceiver shall operate 15 simultaneous channels in interpretation mode and 4 simultaneous groups in two-way mode. It shall have a repeater mode to increase the range of the system.
  • The transceiver shall have a 69dB (A weighted) S/N ratio with a frequency response of 150Hz to 11kHz.
  • The transceiver shall have FCC, Industrie Canada, C tick and CE approvals and be RoHS and WEEE compliant.
  • The transceiver shall have a two year parts and labor warranty (90 days on headphones, battery, charger and earphones).
  • This transceiver shall be the Williams Sound model DLT 100 2.0.

DLT 100 2.0

Dimensions

103 x 62 x 11mm (4.1 x 2.4 x 0.4 inches)

Weight

80g (2.8oz) including battery

Color

Black and silver

Enclosure

Shatter resistant PC/ABS plastic

Battery type

Li Polymer with smart charge built into transceiver

Battery life

Up to 14hrs talk time per charge

Charge time

5hrs. TFP 045 with cable and international adapters

Optional two-bay charger CHG 102

Channels

Up to 15 simultaneous channels (Interpretation mode)

Up to 4 simultaneous groups (2 way mode)

Operating frequencies

2.4GHz (ISM band) 2.402 – 2.476GHz FHSS

Frequency response

150 – 11KHz

S/N ratio

69dB (A weighted)

THD

0.33 %

Microphone input

Internal microphone (disabled when MIC jack engaged) and 3.5mm stereo jack

 

(tip/sleeve) with electret microphone bias, adjustable gain with 63dB range.

Audio output

Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041)

 

Internal speaker (disabled when ear jack engaged)

 

16mW @ 33Ω

Range

Up to 100ft outdoors and 200ft indoors*

Modulation

GFSK, binary CDMA

RF output

14dBm Max

Security code

87 bit encryption

Controls

Front push buttons for volume up/down, quick group select, menu access and selection, MIC on/off, power on/off, tone control, side-tone adjustment, SLOC access and Secure Key access. System reset button (rear of unit).

Output

3.5mm stereo/mono jack 30 pin charging jack

Side tone

Adjustable: Off (0dB), -6dB, -12dB below volume

Speaker

Internal speaker (disabled when ear jack is engaged)

Indicators

LCD (Group, channel, volume level, battery status, mode, signal strength)

LED’s

(charge status, voting) Red LED around talk button when enabled. Amber LED signifying voting feature activated.

Maximum presenters

Two presenters at any given time

Approvals

FCC, Industrie Canada, CE, C-tick, RoHS, WEEE

Warranty

2 years parts and labor (90 days on accessories)

Accessories for Digi-Wave Transceiver [DLT 100 2.0]

CCS 044 Silicone skin for DLT with lanyard and wrist strap

CHG 1012 Digi-Wave charger, 12-bay

CHG 1012 PRO Digi-Wave charger, 12-bay, with case

CHG 102 Digi-Wave charger, 2-bay

DW ACC PAC Charger Pack for DLT, DLR

MIC 044 2P Noise-Cancelling 2-plug Headset Mic

MIC 058 Dual muff headset microphone

MIC 068 Heavy-duty dual-muff headset microphone

MIC 088 Dual muff hardhat headset microphone

Products compatible with Digi-Wave Transceiver [DLT 100 2.0]

Videos

Name Description Duration
Williams Sound: Digi-Wave 2.0 Programming One Way Mode

Digi-Wave 2.0 Programming One Way Mode

5:15
Williams Sound: Digi-Wave 2.0 Programming One Way Mode with Captions

Digi-Wave Programming One Way Mode - CC

5:13
Williams Sound: Digi-Wave 2.0 Programming Two Way Mode

Digi-Wave 2.0 Programming Two Way Mode

7:14
Williams Sound: DLT 100 Battery Replacement

Instructional video on the replacement of a Digi-Wave DLT 100 Battery.

3:35
Williams Sound: Digi-Wave 2.0 Programming Two Way Mode with Captions

Digi-Wave 2.0 Programming Two Way Mode - CC

7:14